head gasket replacement thread?

What year make and model?

Isn't much difference between the years. Later models had more hoses for emissions. It is a heavy head when you have to lean forward to remove, much much heavier if you leave the manifolds attached. I used a engine hoist to lift one out the last time I did it.

Getting the intake and exhaust to seal up later can sometimes be a chore.

Basic steps

Unhook battery, remove carb and exhaust pipe,drain radiator and remove upper hose,remove lower hose between w pump and head, remove intake and exhaust manifold, remove valve cover and rocker shaft and pushrods, remove spark plugs wires, if it will turn remove block coolant drain plug below cylinder 4-5 behind the oil pump, remove head bolts, remove head.

i may have left something out I haven't done it in 10 years. Good luck