Main Bearing Clearance

dartjack said

Questions;
Does anyone think that 110 torque PLUS 90 deg is a little snug for main bolts?

Are you oiling the bearings before checking clearance?

Are the other mains installed and torqued?

Have you checked with crank in another position?

Click to expand...

This is a very good question.

See milodon says 85ftlbs w/light oil for their main studs, and now im reading that arp wants 110ftlbs w/moly lube...

I have already run one of my motors with 85ftlbs on the main studs with no issue, but it makes u wonder...