Replacing lower control arm bushings

Easiest is with the special tools available. I bought them from Mancini Racing. The pivot shafts came out easily but even with the "special tools" I wound up , pounding, cutting, chiseling the outer shell out of the lower control arms. I cut a slit with a 3" cut-off tool at 90 degree intervals then got under the lip with a chisel and pounded a 1/4 section of the outer shell inward till it gave up. New bushings will need to be pressed in, then press in the pivot shafts. PM me if you would like me to redo em one weekend, maybe mail em to me. Plant city is only about 100 mi away. Anyway hope this helps, Eric