My 6.1 hemi build!
Did a little more work on the Dart today.. I received the transmission yesterday and decided to get the motor and tranny in the car today. I got the car on the lift put the motor in and the truck oil pan I'm using hits the rack and pinion steering. So I cut the pan and was able to make a template to weld in place tomorrow to clear the rack while still having clearance for the pic up tube. Everything seems to be fitting in place pretty well so far. It looks like I might need to either adjust the rear coil overs up 1" and possibly get 150 spring vs the 130 I currently have. I ordered all my Auto meter gauges today as well.. the custom dash made it's way here yesterday and that will be going in soon as the gauges get in and we finish up the 8.50 cage. We almost finished up the entire fuel system from the cell /pump/hoses/controller/fittings/and reg. We are waiting on the motor to be set exactly so we can run the hoses to the rails. Here is a little **** for you guys to look at in the mean time.
Did a little more work on the Dart today.. I received the transmission yesterday and decided to get the motor and tranny in the car today. I got the car on the lift put the motor in and the truck oil pan I'm using hits the rack and pinion steering. So I cut the pan and was able to make a template to weld in place tomorrow to clear the rack while still having clearance for the pic up tube. Everything seems to be fitting in place pretty well so far. It looks like I might need to either adjust the rear coil overs up 1" and possibly get 150 spring vs the 130 I currently have. I ordered all my Auto meter gauges today as well.. the custom dash made it's way here yesterday and that will be going in soon as the gauges get in and we finish up the 8.50 cage. We almost finished up the entire fuel system from the cell /pump/hoses/controller/fittings/and reg. We are waiting on the motor to be set exactly so we can run the hoses to the rails. Here is a little **** for you guys to look at in the mean time.
