Things have just changed 360 build

OK so I just got a new job and it pay a lot more then my other job so I have a new budget and build.I was thinking about a 383 but not ready for a BB.

So lets start

360 block

Edelbrock Performer RPM Cylinder Heads
http://www.summitracing.com/parts/EDL-60779/

Harland Sharp Shaft Mount Roller Rockers
http://www.summitracing.com/parts/CSP-S70025K/

Mopar Performance M1 Intake Manifolds
http://www.summitracing.com/parts/DCC-4876334/

Stoker kit 408 kinda like this
http://www.coasthigh.com/Chrysler-408-Flat-Top-5-5cc-Scat-Based-Kit-p/13746-sca-342-m408-1.htm

I would like to keep it on pump gas.

I am going to run a 650 carb not sure the make yet.
I also don't know what cam I am going to run I like the Hughes Engines Whiplash cam.But is not that a cam with around 510 to 540 lift.

Also would I want to run a 8 1/4 rear end or a 8 3/4 rear end
Front rear disc brakes.
727 tranny of a 4 speed maybe a 5 speed
It is going to be a Daily Driver.