First Start Up! Hyd. Cam Break In! Tonight!

Okay, any tips? check list? going for break in tonight.

Its a stock stroke 318, stock bottom end, RHS heads prepped by Brian @ IMM, 202/160 valves, beehive springs, Hughes 1.5 roller rockers. Compression is probably 8.7-8.9. (I know, kinda low)

Edelbrock Performer RPM Cam and lifters. 234/244 dur @ .050. 488/510 lift.
Performer RPM intake manifold. holley 650 spread bore carb.

I got Joe Gibs break in oil.

Also, rebuilt 904 trans with 1 qt in TQ converter, and 6 qts in trans. Probably will need more. How much more oil in trans?

I have 76 brand 91 octane fuel. going to pull the valve covers and dizzy, spin the oil pump and inspect oil to heads.

Any tips? what should I have initial, and total advance?