Best 273 and 318 builds (NO 360's please)
my standard bore, original piston 318 made 165kw/224hp on the rears. jetting was way too rich with black smoke pumping out the pipes and then it was all cut short on the second pull with front uni spitting a cup out and smashing the 904.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
anyway this is nothing more than a rattly old '74 318 twice rings and bearings 250 000km motor
std mellings pump
Heatseeker stage 2 cam 276 degree .420"lift
8 degrees advance valve timing (leaving some top end on the table)
1.6 stainless rollers (.450"lift)
Eddy heads out of the box (240cfm @.450"lift)
Strip Dominator intake with modded 600 Eddy carb
Accel dissy and mallory coil
my standard bore, original piston 318 made 165kw/224hp on the rears. jetting was way too rich with black smoke pumping out the pipes and then it was all cut short on the second pull with front uni spitting a cup out and smashing the 904.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
anyway this is nothing more than a rattly old '74 318 twice rings and bearings 250 000km motor
std mellings pump
Heatseeker stage 2 cam 276 degree .420"lift
8 degrees advance valve timing (leaving some top end on the table)
1.6 stainless rollers (.450"lift)
Eddy heads out of the box (240cfm @.450"lift)
Strip Dominator intake with modded 600 Eddy carb
Accel dissy and mallory coil
