The Great Wheelchair Hack and Cathouse Thursday

All--- RIGHTY then. Got the Invacare chair "functional" and pretty much configured to be useful, an something I can handle in and out of the trunk of the car

So here's the rough idea. The major parts of the machine, I forgot to lay out the foot rests in the photo



Below we see the main frame pinned together, with the battery tray Still have finish work to to, sand/ grind the rough edges, etc, and tie up the wireing. Wiring/ controls will all remain on the left side. Only things I have to disconnect for breakdown is one motor connector, the joystick on the left armrest, adn the two battery connectors



Below we see the seat frame. The front/ rear channel was made by cutting one side off the larger dimension square tube I bought, which fits over the top of the smaller size, same tube I used for the sockets on the frame



Below we see the seat, armrests and batteries installed. The seat/ armrests are off the "formerly known as Jazzy" chair, which essentially has become "parts is parts."



And with the footrests on, the master stroke of engineering genius is about ready