new 130 tooth f/w for < 100.00

-
my68barracuda

my68barracuda

Well-Known Member
Joined
Dec 6, 2009
Messages
2,616
Reaction score
2,606
Location
Indianapolis IN
what do you think about a new 130.00 tooth steel billet flywheel for 99.95?

http://store.440source.com/1045-Billet-Steel-Flywheel-New/productinfo/113-1014/


when I found the internet page, I figured I stumbled on an old, out of date web site,, gave them a call and they said they sell these everyday at that price,,
anyone familiar with this vendor or these flywheels?,,they are about 200 less than the Hayes or Mcleod simular parts.

thanks
 
Not SFI approved, but I plan on using one.
 
I have one in my build. I believe they will sfi approve them for a fee though. And if someone want to check mine for an sfi sticker when its incased in my QT scattershield they can sure try.
 
Wish this was available for the 5.9 Magnum.
 
As I understand it the 5.9 Magnum balances differently than the other externally balanced V8s. I called this company and they do not list it as compatable with the 5.9 Magnum.

McLeod sells their flywheel weights separately and list the same weight for the 71-72 360 and the 5.9 Magnum. I assume from this that it is installed in a different location. I know MP manuals have a diagram that specifies all this. I had contemplated relocating the weight as a DIY but have to been so brave to do so.
http://www.forabodiesonly.com/mopar/showthread.php?t=178065

I kinda wonder if this is a McLeod flywheel 440source is selling.
 
Rods59rt said:
The Magnum flywheel needs slots for the crank position sensor.
Click to expand...

Good point but not needed with a carb. I'd like to see the mopar performance diagrams for 360s and 5.9 Magnums.
 
You must log in or register to reply here.
-

Back
Top