5.2 Magnum into a '72 Scamp-tips?

I did a Magnum swap also. I found a 73 318 in the boneyard and stripped the entire front end of the motor, cleaned it up and installed it on the Magnum. I used a 36o passenger car pan with the stock timing cover and in the front of the pan where there will be a gap, I filled it in with silicone. I also considered serpentine but was unable to find an entire, complete front set up as I was not in piece mealing a set up, and thought that there would be more aftermarket ac set ups for the v belt set up as I will be adding ac as soon as soon as I can afford it. It was an extremely easy swap, using the inexpensive motor mounts. The only technical issue was the converter/flex plate/. To run the neutral balance converter, I had to scrounge a 95 and up weighted flex plate as Mopar changed the balancing of the converter to a balanced flexplate in 95. Goopd luck.