HEI Conversion Done still not starting

"I'm going to guess you've had the distributor out at least once, so you've probably checked and approved the condition of its drive pinion (or at least you've verified that the distributor is in fact turning when the engine is cranked), right?"

Actually, as lame as this sounds I have not run it with the cap off to see that it was turning & I have not pulled the Distributor to check the teeth. That being said I checked the spark at both the Coil wire & a spark plug wire. So if I getting spark at the plug wire it should be turning.

I haven't had a chance to check the timing yet.

I think I'm going to try Starting Fluid as well just to be sure it's not that.