is this a good combination or am i looking for trouble

canner78 said

on another posting that i started people are saying that i cant use my 58 cc heads with the thin gaskets and the keith black pistons. they say it is not enough piston to head clearance and that i have to use the fel-pro .043 head gaskets. what do you think?

Click to expand...

As I said in a earilier post that the pistons should be close to 0 deck this is something that you'll have to look at when you install the pistons, if they are below deck then the thin gaskets should be OK, but you'll have to measure the deck height after the 1st piston is installed as blocks are all very different and so are the deck heights. This is part of engine assembly and making decisions or adjustments as you see problems and as they arise.