I will try to send some pictures later this week, no time at the moment! It's not all that bad, that is if you don't mind a challenge. My 65 Valiant was a v200 (273/904), the trans cross member works!!, The K frame works!! You will need to move the steering box towards the fender about 3/8" of an inch by elongating the bolt holes. You will also need to mill the pass side manifold inward 7 degrees, this will help to tuck it in and away from the steering box. You will need to purchase or fabricate some motor mounts. I fabed mine. I think Shoemacker ( spelling) makes some, Expensive!! This is not going to be easy!! Send Me your e-mail and I will be happy to send pics and help you along!! There are a few tricks to doing this, and a few do's and dont's. Give me a shout!!