5.7 Hemi A Body Swap

If you don't want to cut the cross member or modify the tunnel you're pretty much limited to the following:

Automatics:
727 or 904

Manual
A833

You can add a Gear Vendors Unit to any of these if you want an over-drive. The Gear vendors unit, has a strong reputation and is rated for 1200 HP. Many drag racers who compete in Hot-Rods Drag week use them.

You can also wait for Passon Performance's 5 Speed, according to Jaimie, they should finally be shipping in May. (Of course they were suppose to shipping by Summer of last year.) I really like the idea of the Passon 5-Speed, it's pricey at $4295.00. If you already have a four speed all you need to buy is the five speed, it even comes with the appropriate shifter. If you're converting from an automatic to this setup the cost is high.

The 518, TKO, T-56, and 6060 all require some modification to the floor pan and or the cross member.

A word of warning, the TKO from Keisler does require some modification, even though they claim a perfect fit. What Keisler promises, is that the shifter will remain in the stock location and provide an accurate historic placement of the shift handle.

Regards,

Joe Dokes