that mooneyham 14-71 supercharger belonged to a friend along with the injector and mag III. with that combo it went a 9.46 if i recall correctly. with this motor it's only been to a 1.24 60'. the one in the pic obove decided it didn't want all the rods inside so it tossed a few out. that was back about, gosh, 5 years ago already, damn time's buzzing by. i went thru the motor this winter and discovered a few problems and fixed them. every time in warms up here and i get ready to go test it the temp drops like a stone. when it gets below 50* it doesn't want to start. i'm jonesin to go for a ride.
the motor now is is a kb stge 10 with the same 440-1 heads. donovan gear drive. .700" roller cam. 10.4-1 compression. aluminum rods and flat top pistons. a littlefield 14-71 retro. square door buzzard injector. the system was set up by spud miller at fuel injection interprizes. the torque convertor is a jw with the mechanical diode. 727 with a bunch of good parts. dana 60 with 4.10's. ladder bars and coil-overs on the 4 corners. 31x10.5w's. rack steering and wilwool disc up front and drums on the back. here's a pic of this motor. opps, wrong button.