is this a good combination or am i looking for trouble

thanks everyone with your advise i have decided that i am going to go with the swirl port 302 heads ( i measured them and they are 58 cc) and the keith black Hypereutectic, Flat Top pistons that give me a 10.3 to 1 compression ratio. but i am going to buy the fel-pro head gaskets holley 4160 750cfm carb, edelbrock performer rpm intake. comp cams extream energy cam 274/286* and .488/.491 lift Valve Springs, Dual, 1.437 in. Outside Diameter, 409 lbs./in. Rate, 1.050 in and full lengh headers. a torque converter with a 2000 stall and 3.55 gears. i am looking forward to ordering my parts this week. this should really wake up my 318. thanks guys!!!