Magnum Air Gap...what bypass hose to use???

Hey ! When you modify one thing, you'll probably have to change two more.

I just changed my M-1 to an Air Gap on my magnum engine and had the same problem with the hose not fitting. So I basically did the same thing as 64physhy.

Took two barbs off and two threads off the brass fitting. But be careful, if you do the threads, and added a little high temp. pipe dope w/teflon.

I used the same hose but took some off each end. Take a small amount off at a time. You might want to mark your hose in place for your final cuts, because the hose gets a little twisted, but not bad. Vaseline helps a bunch.