383/Manual steering box/slant six stuff

-
Status
Not open for further replies.
A

Annabelle's Ride

Member
Joined
Apr 23, 2012
Messages
7
Reaction score
0
Location
Outside Atlanta
Rating - 0%
0   0   0
Contact seller
I have a early 383 core motor. Its basically a long block(heads included) Its been outdoors for a loonnggg time. Well seasoned if you will. A unknown manual steering box (its MoPar just dont know what it came from). And a torn down slant six. Also a super six intake. What I need is LA rocker arms , shafts, pushrods, and valve covers. Also need exhaust manifolds for a LA. I also need a right hand(pass. side) upper control arm for a 72 drum brake duster. I need this stuff pretty quick so lemme know what you have. Im not looking for anything special just decent oe parts. Will post pictures this evening or tommorow.
 
I have some 1970 318 a-body manifolds if you are interested, would be a few days till I can get them, don't have them at home but they are good condition.
 
I can come up with control arms for a '70 drum car. Can't imagine they'd be any different than '72. Interested in your manual steering box, depending on sector size - which we can determine via a photo.
 
im just north of you and im going BBP on a 72 dart with 10" drums you can have the whole set up including new drum brake master cylinder for the 383 would like to see though
 
Thanks guys for looking/posting!!! The 383 isnt a HP block. I cant imagine it is. Its early era out of a letter car. How would I tell? (Im a LA kinda guy) The steering box is in limbo right now pending a local trade. But i wouldnt hold my breath. Just wanted to be honest with you guys. I'll probably still have it.
 
Thanks guys for looking/posting!!! The 383 isnt a HP block. I cant imagine it is. Its early era out of a letter car. How would I tell? (Im a LA kinda guy) The steering box is in limbo right now pending a local trade. But i wouldnt hold my breath. Just wanted to be honest with you guys. I'll probably still have it.
Click to expand...

Annabelle's Ride is great to deal with
 
Ok Guys, Ive got all the items covered on this thread minus pushrods so I'm gonna start another with some more stuff I need. All thats gone is the super six intake. Everything else still availible. (steering box deal was a no go) Thanks to Motopsycho and ef8340 for helping me out. Your both stand-up dudes.
 
Can you post a photo of the manual steering box? Does it still have the Pitman arm attached? If not, can you measure the diameter of the output shaft on the steering box with calipers (smooth part above the Pitman arm splines).
 
Status
Not open for further replies.
-

Back
Top