Ported Slant 6 head

"Frankenteen"That is funny.
My 74 dart with 318la is getting the Magnum heads after all,I chickened out on milling the J heads(saving them for my 340)...I just clearance d the magnum heads so the pushrods would clear the heads.It zero deck and .525 lift.
Stock 466 heads with Hughes 1110 springs and retainers,guides cut for up to .600 lift and milled to 60 cc chambers.May try bolting them up tomorrow and see if I need to do any more grinding...they are not going to flow much,but once again running what I got.I bought a lot of parts for my darts in the past couple of years and now I got no money for the good stuff,so I going to get them running with what I got.