ball and cup push rods installation??

I adjust rockers with each cylinder at tdc compression stroke. There is a chart that Mopar put out that has a different sequence of valves that can be adjusted depending on were the crank is positioned. I just use the tdc method because it is easiest for me because I have done it for
30 years that way. As far as the adjustment itself, you turn the adjuster until the play is taken up in the valve train then turn adjuster an additional 1/2 turn, this should be just about right.

One note about push rods, hydraulic lifters with adjustable rockers take a different length push rod than mechanical lifters do. Basically you want a T/A length pushrod, they had adjustable rockers with hydraulic lifters.


Chuck