Tail Panel advise

-
clhyer

clhyer

Well-Known Member
Joined
Feb 24, 2007
Messages
3,734
Reaction score
320
Working on my '72 Duster. The outer tail panel is rotted out around the tail lights. There isn't enough there for me to even get a pattern so that I might try to fab up a piece. I don't see that anyone offers a repop tail panel. I need some help here!
Thanks,
C
 
Any hints on fabricating a new piece without any measurements? Has anyone done one that can share the dimensions? If I had the tailight opening dimensions, I might could work off that to start.
Thanks,
C
 
Taillight panels do show up on ebag every once in a while. Yours sounds too far gone to repair. search here and Moparts.com . good luck.
 
'72 Duster is a "one year only" application. A nice used '72 tail panel is really tough to find. I ended up making one out of two. Took a lot of effort and no small amount of work. Its almost worth it buy a complete donor if you can find one close enough to where you live.
Daryl.
 
i have a tail panel i remember it had a pretty big dent in it but i dont remember where i will try to take a pic tomorrow and post it so you can see what i have depending on the condition maybe it will work for you and we can work something out. Justin
 
yup.one year only.contact goodmark.ask them if they are going to repop them. or post want adds on all the sites.
 
Thanks for all the follow ups, guys. I did check around before making my post. I belive that I have found a suitable replacement, I'll keep y'all posted.
C
 
You must log in or register to reply here.
-

Back
Top