Mini starters for 5.7
Yeah my tranny is a tr6060 not a t56, I don't see why it won't come off though, it's looks like about 8 bolts in there and it should come off. I'd need to shove the motor back 8cm in order to give me 10mm clearance. If I do that then the firewall needs to be pushed back but the worst part is the part where the steering column bolts to the floor would have to be pushed back I think due to the wide heads.
(the white tape shows how far out the shaft from the steering rack comes to
I measure the depth of the bellhousing and its about 185mm (7.283"), is that what the depth of the one on your t56 is? According to the one people say to use the 8074, http://www.kmjent.com/cart/product.php?productid=2246 it only has a depth of 6.697" or 170mm
Yeah my tranny is a tr6060 not a t56, I don't see why it won't come off though, it's looks like about 8 bolts in there and it should come off. I'd need to shove the motor back 8cm in order to give me 10mm clearance. If I do that then the firewall needs to be pushed back but the worst part is the part where the steering column bolts to the floor would have to be pushed back I think due to the wide heads.
(the white tape shows how far out the shaft from the steering rack comes to
I measure the depth of the bellhousing and its about 185mm (7.283"), is that what the depth of the one on your t56 is? According to the one people say to use the 8074, http://www.kmjent.com/cart/product.php?productid=2246 it only has a depth of 6.697" or 170mm
