LED Dash Light

ok so now remove the high beam lens (grind head off) and pop off the green and red lenses for the oil light and blinkers...

now onto the bezel and lense!

you will see more of the (i call them rivet heads) holding the clear plastic into the bezel... you will need to carefully take all the heads off those to get the clear lens out...

once you get them separated look thru is to see how dirty and scratched it is...

will get it it later... now your method if restoring the bezel and housing can go alot of ways... im not worried about that little chrome edging so i end up doing it painted but if you want that you can either try to cover it or may look into a new dash bezel...

so i just thru them in the bead blaster and went to work! once they were all clean and etched they were ready to be cleaned and painted!