Inner fenders tie the front of the car together. So if you take them out there will be nothing to support the front frame rails. You will need to brace it back up along with the shock tower.
Have seen a few different ways to do it but here is a few pics of the most common way.
If you have a roll cage in the car you can run the bar through the fire wall and attach it to the down bars on the cage.
If you don't you can weld a plate to the fire wall then attach the bar to that.
Run the bar out and attach it to the shock mount then continue out and down to the front frame rail.
his will tie the front of the car back together.
Is also a good mounting point for a motor plate.
Think you can get the bars from MagnumForce. Or there is a member here that makes them too. Cant remember who it is though. Sorry.
