A Valiant BJ / Powerdyne BD-11

bohica2xo said

With the PJIII you need to do one other thing if you plan to use methanol injection. Activate the E85 setting (brown wire) via the Hobbs switch you use for the methanol.

The problem is you are adding fuel (methanol) and the PJ will see that & pull fuel out of the injector cycles.

What you want is boost ENRICHMENT. By switching to the E85 settings you get the fuel curve offset under boost.

B.

Click to expand...

When referring to a Meth Injection Kit I was referring to the Kit itself. You don't need to spray 100% Meth. Alot of guys just spray 100% Water or even a 50/50 Mix of Meth and Water. You will not get the Fuel explosion that most think you would. When injecting the "Spray" it is broken down in to a Misty Steam which cools off the intake charge & Cylinder Temps. This is what you are after, not using it for another Fuel Source.