A Valiant BJ / Powerdyne BD-11

bohica2xo said
With the PJIII you need to do one other thing if you plan to use methanol injection. Activate the E85 setting (brown wire) via the Hobbs switch you use for the methanol.

The problem is you are adding fuel (methanol) and the PJ will see that & pull fuel out of the injector cycles.

What you want is boost ENRICHMENT. By switching to the E85 settings you get the fuel curve offset under boost.

B.

THANK YOU! I never though of that. Other than hooking up the brown wire to be hot when the boost switch is activated a 3 psi. Do I need to flip and swiched or adjustments in the Stage III programing. BTW. The wiring doagram in the PJIII instructions says the brown wire is for future use.......Did we time warp?
:prayer: