Help Please!!!! engine wont run

shaft bushing was replaced and is still tight from rebuild, all cylinders have good compression (120-130 psi cranking with starter), chain did not jump a tooth and keys are in good shape. everything checks out fine but it will not run. I've tried adjusting the timing either way and it doesn't help. I have verified that the dist is in right finding TDC on compression on #1 cyl. I dont think its a valve spring problem but how could i tell? It has stock 360 springs i think, they are dual coils but the inner coil isnt a spring, its a flat piece coiled up if you know what i mean. could it be that one of the coils broke on a spring so everything still checks out turning it over by hand? But the way it runs it doesn't sound like a problem with just one cylinder, It sounds much more "tinty" and has no rumble. Almost sounds like timing is way retarded but I really dont have much experience working on these engines yet. im only 18 years old trying to put a car together, thanks for the responses so far but i still cant find an issue