Make your own adjustable strut bars.

Thanks.
If you look at the 2nd pic the 2 washers just to the right of the angle grinder with the washer on the anvil. Those are the two washers I "turned" down to 1-1/8 outside diameter. They then go in front of the gold bracket and reduce the k frame hole from 1-1/8 to 5/8. Then the bolt through the front.
I'll post some more detailed pics when I get a chance. Pretty easy though. I found 5/8x18 rod ends with a 1/2 ID so when I build a set for my car I'll probably use them just so it's a touch easier is all.