Looking for large tube SB headers

The tubing has gone up , my friend.
With coating , I'll have better than a grand in a set I built.
The un-welded kit from Stahl has pre bent tubes that you will need to cut position and weld. 500.00 with 3 1/2 " collector less flanges. W-9 flanges from SPD 160.00 , 4 into 2 into 1 X 3" collectors from Flowmaster were a buck forty. I'll try both on the dyno before I see what it likes and go with those.
Coating will be around 260.00 I am thinking......I pick them up next week.
Having someone else build them would have added around six bills to two G's depending on material and vendor.
But getting large tube equal length primaries that fit inside the stock frame is a real treat I bet.
I don't have torsion bars or inner fenders and I had around 45 hours into them.
If someone made W-9 headers with the required tube size and length for what I was doing , I would have given them 900.00 and did what ever unspeakable things they liked.......and considered it a bargain.
I think Stahl's welded headers are around 1600.00 and I don't know if that included coating or not.