Evens engine harness, not made right?

Move the wire if need be. Not hard to do. Make sure the wire you think is coming out of there is the correct one.

You can slide a scribe, paper clip or pin in the slot with the terminal and press up slightly to release the lock clip. Some have used a pair of needle nose pliers to squeeze the terminal together collapsing the lock clip. Pull lightly on the wire and it should slip out. Bend the tab back down with a small screwdriver and slip it into the slot it needs to go, it should click when inserted.

Here's what the terminal looks like to give you an idea.


Easy fix.

I'd verify the harness runs just to make sure.