*NEW* Solid Roller Lifters From MRL Performance

Its a self metering way to oil up thru the pushrod. If your not using oil thru pushrods, its no big deal. Just like the hydraulic flat tappets we use now, they all have the ability to oil thru. There is a hole that runs parallel with the roller axle that intersects the hole in the pushrod seat. This send oil up thru the pushrod.

Our rollers are the best, plain and simple. They get a constant supply of oil to them to keep them lubed and cool. Blocking all the oil going to the lifter is a bad idea, and a lot of lifters have failed because of this. Tubing and bushing the lifter bore was the norm because the lifters would not fit right and oiling issues were rampant. Those days are over. I fixed it for all. Our Pro Sport rollers are better than the "Elite" rollers from the other guys, and our Pro Plus well that the best.