Homemade Soda Blaster

Here is where I got the idea.

http://www.aircooledtech.com/tools-on-the-cheap/soda_blaster/

Here is a video of it being used.

http://www.garagenight.tv/diy-soda-blasting-build-your-own-rig-cheap/

I need to refine mine a little, I think I used to big of a hose so I will be downsizing to a smaller diameter hose. I used 1/2" and it works but has a hard time sucking the soda up through. I am going to use a piece of 3/8" and that should improve things dramatically.

I also used a pointy spout that you can put on a oil jug or differential lube jug, and cut the threaded part off and taped it to the end of the hose to concentrate the soda to a smaller area.

All in all it worked well. With some tweaking I think it will work a little better. There was even a small spot of paint on the intake and it took it off, I was surprised.


I would also highly recommend that you wear a particle mask as it is very dusty, eye protection as well.