I checked the lift four times on 1 intake and exhaust and twice on 2 each time I did it I got different numbers the final numbers I posted were a average of the six readings which I'd say the rockers are realistically ture 1.5 ratio not the advertised 1.6 but this was the first time I've checked lift so it's possible I was doing something wrong! Don't no? But I did take some measurements of the stock rockers compared to the clifford/Buick arms and the stock arms are about..850 longer then then the other ones and me and Bill Dedman determined with our modified stock rockers arm that we need to take off..100 off the push rod end of the arms
Mostly what I'm after is to take advantage of the custom turbo grind cam that's installed so from all the data I've compiled it would be safecto say the stock arms aren't 1.5 ratio there probably only 1.4 and that data is pretty much right on with what some of the slant guru's say
And for two bills I'm very pleased with the results in if there only 1.5 ratio:burnout:
I hope this helps
Aaron
