Torsion bars are easy. You release the pressure by removing the adjuster blocks on the lower control arms. There is a small retainer clip in the back torsion bar crossmember frame rail. remove them. The "tool" that you use to remove the bar with is simply a block that bolts to the bar to allow you to tap on it. You could use a small u-bolt or even a good hefty set of vice grips. You just need to give the bar a few taps to get it moving out the back.
Dont whack it too hard . lmao had to say it lol ..... If there really really stuck lossen the lca's give them a little wack .. Helped me ... Just saying lol but dont tak them off tell the t bars are out lol :happy1:Btw Do what was said up top 1st .
