Electric choke wired to coil?
I ran an electric choke off of the 12v side of the ballast resistor; result was poor idle due to a voltage reduction at coil via parallel path to ground. In other words coil was receiving less than its 5-6 six volts.
To correct the voltage drop, I used a relay triggered by the blue ignition wire, and choke is powered from battery.
I ran an electric choke off of the 12v side of the ballast resistor; result was poor idle due to a voltage reduction at coil via parallel path to ground. In other words coil was receiving less than its 5-6 six volts.
To correct the voltage drop, I used a relay triggered by the blue ignition wire, and choke is powered from battery.
