lokar kickdown linkage 727 question on 440

Mopar King said
reason i went with a cable setup is because the car didn't had a kickdown linkage just a small metallic wire wrapped onto a metal line. I also don't think a linkage would fit and even then i don't have it. So i went with a cable setup.

Still having the problem of cable not moving when you open throttle all the way. maybe its has to do with where the cable is at the top, does it have to be even with the throttle or below? maybe its also the bracket where it holds, i don't have anywhere to hold the cable bracket.

sorry if i couldn't explain it more clearer or if i left out something, trying my best explaining in detail

I can't use the lokar srk 4000 because i won't be straight and won't reach, I am using the Holley 20-7 bracket which sort of works.

:-kOk here is as simple as i can make it. Your throttle shaft is the pivot point for both the trottle cable and the kick down cable so if the trottle cable is hooked on the bracket above the throttle shaft then your kick doun must be hooked to the empty hole in your bracket below the shaft. Look at pic in instructions or mine on the X ram or pic from member Chameleon. all show throttle cable above and kick down cable below the throttle shaft. The way yours is hooked up in your pic the kick down and throttle cable are both above the shaft.