ModMan intake Oil filler / PCV port?

Sorry it's so hard to see stuff, the fuel rails really get in the way and my L bracket mounts are a lot bigger than the stud style stuff that Indy does, but here's my setup. Evidently it doesn't work quite as nicely as I had hoped. The breather side is started to get pretty oily again like it used to, even though there's a PCV on the other side. I don't think it's as bad as it used to be at least, but it's still not clean like I'd like it to be. You might be able to make it out, but I have a 1/4" NPT (or whatever size the port is) brass tube I just got from the hardware store threaded in to the port to move the location up away from the fuel rail mounts so I could actually put stuff on it. On the passenger side I just have the little air cleaner, on the drivers side I just got a generic PCV valve and used some hose to connect it all. I think the PCV was from a 50's Caddy or something, I did some looking about what people recommend for a valve on any kind of retrofit engine and someone suggested this one.

To put oil in it I can just pop either the PCV or the breather off and pour it down the little tube. Like I said, it takes a while, but you shouldn't have to do it too often, so it's not terrible. I just got really tired of it because when my oil pan cracked I changed the oil on my car about 3 times in a week or two, so it got pretty old, lol.