wanted 10" front drums

I got front 10" drums at rockauto. They were cheap ($25 I recall). Look at Centric since they schematics with all dimensions (don't know why others can't). Rear 10" drums must be gold, since people ask $80 for used ones. When I need them, I mightget 4.5" drums and drill new holes.

One member here sells a nicely rebuilt K-H disk setup for ~$775. An easy and correct approach, but parts are scarce now and will probably get worse. Scarebird is a little cheaper. He uses common GM and Toyota parts, but you will forever have to drill rotor holes for 5x4" pattern and you get a simple 1-piston slider caliper. He does have models for 9" drum spindles too. Going BBP adds other complications (dual spares or change rear). I am pondering a custom approach someday. If I only had a milling machine.