Redline

The 273 I'm gonna build the bottom end should be good for 8000rpm's fully blueprinted with factory Steel indexed crank, scat rods, custom forged pistons with the oiling crossover tube so the redline will be limited by my valve train. I'm going with solid roller cam and rockers not that i thinks its need for this power level but greedy trying to keep as much bottom end while still having a great top end. Also going with ported out 273 heads gonna run 11/32 valve around stock diameter with beehive springs and titanium retainers and the lightest 1.6 roller rockers which keep my spring pressures needs lower.