blower mtr wire

Ok, well a few things I have learned doing this...it aint done but I think the hard work is. The ac box and heater core box went in seperately...pulled the ac box out and put the green and black wires into the eng bay..correctly!! Then reinstall the ac box and leave it a little loose. Try to install the heater box...boy oh boy why is it everything I attempt is a frickin struggle?? Tried for about an hour in 90* heat...just didnt seem to wanna go as the heater box was hitting on the bottom of the ac box..This is even after taking the kickpanel off to give us more room. We unhooked the vacuum pods on both ac box and heater box and just let them hang as they were in the way. Removed the light under the dash just below the glove box...thank God the glove box liner was already out as well!! We finally got tired of trying to manouver it in throughout all the vacuum hoses, cables and whatever else was in the frickin way and we tied everything back to the shifter with the green bailer twine!! LOL

Although we arent done yet, my advice on this task would be
1)remove kick panel
2)undo vacuum pods from brackets and let hang down
3) glove box liner out
4) remove seats
5) lotsa beer and left-handed cigarettes