318 stroker oil leak :(

wow thanks for the amazing fast responses guys!!!

I checked the valve covers and intake area at back of block ( ya i used the cork gasket there) and wiped all surfaces with shop towels and only a faint trace of oil at rear of passenger valve cover.

I got the car up on ramps and looking underneath the drivers rear oil pan gasket is slipped out a bit but all this oil looks like its coming from above. the oil filter adapter bolt is dry, the adapter itself has some oil but so does the starter on the other side, looks to be the same amount side to side so i don't think the 90 adapter is at fault.

also i stuck my finger in the bell housing and there is some oil pooled up in there, i have been running without the small dust shield (its buried somewhere in the shop lol) so i think the oil flowing into the bellhousing from wherever this dam leak is, i have a ratchet shifter installed and the cable goes underneath the bellhousing and its dripping oil too, it's wet from higher up.

My block is painted white so i thought it'd be easy to spot :(

if it was the oil galley plugs or rear main seal that would leak into the bell housing and slosh all over the flex plate while its running right??? the flex plate and torque convertor both look dry and wiping with a rag i don't get any oil picked up off them

when the wifes off work i'll do a lil more investigating and retorque all the intake bolts to rule them out.