Steering Wheel Modification Thread: Where Did it Go?

Its not to hard to do, if you have some fabrication / mechanical skills.

I've done two of them. Basically you take the column apart and remove any parts related to the shifter handle, or the gear indicator. As for the Bumps left over from the shifter and indicator, I used a disk sander with a 36 grit disk, to grind them down to nothing. You will have some empty spaces in both areas that will need to be filled in. I used jbweld, then a little bondo over the top, lots of sanding to get things smooth, and then paint.

I could post pics later if you want to see finished results.