Compressor Mounting Bracket

ok. so this is the tensioner attached to the compressor bracket and im not sure if you can see or not but the crank pulley has a smaller groove in the rear (towards the crank) the water pump pulley is only a single groove. the belt goes from the compressor to the tensioner to the crank and around again. it comes close but it doesnt come in contact with the water pump neck or the timing tab. it is a wider belt. 1/2" if i remember right. is your car power steering? if so im still trying to figure out how it mounts without interfering with the a/c belt. its one confusing system but once you have all the right parts its pretty cool. pardon the pun. and finally the rear mount you have is correct. they are fit and notched so they only go on one way and bolt up.