Time For a rebuild

Talked to Bill this morning and he said to loosen the bolts from the mount to the engine and it should give enough room to move the trans into position. Mo-cars you suggested the same thing. So I loosened the bolts, lifted the engine a little and the trans, removed the trans mount from the car, bolted the mount back on the trans. Still had to pry the trans over 1/4 inch, put the trans mount bolts in. Dropped the engine down and tightened the engine mount bolts back up. Not sure I an 100% happy with still having to pry the trans over as I am not sure of it being under tension. The engine will be in and out a few times I am sure I may open the engine mount bolt holes a bit.