Compression ratio calculator?? And power figures?

Thanks jerry6, have you used his program?, or has he tried with your setup? The car surprised me, it took off like a scalded/rabbid dog lol. It chirped the tires through the gears,(which surprised me also) and left a long friggin trail of tire marks. The carb is getting gas. With the car off i looked, into the carb, and it gets great supply of fuel, wires are new, and none are loose. After it stalled i coasted to the side of the road, and nothin at all. While i mashed the pedal it went grreat, then stalled(while my foot was still planted) i didnt leave off the gas. Good it be a bad coil? I have the echlin chrome ignition setup, new rotor, cap, and wires, new plugs. It idles all day long and has great throttle response to it. It stalled ,then i tried to start it, but just cranked over. Any tips on what to look for?? Bad coil?? Ballast resisitor i think is new as well, but not entirely sure??
273 put in my specs , or close to ., and it came within 5% of my actual numbers , so yes his simulator works well .
As to why the car stalled and now won't start , good question . That happened to me once , it was the ballast resistor , if it is the B R it will sound like it's going to run and die as soon as you let go the key when starting . Check if your getting spark to rule out bad coil , make sure ECU is grounded well ,make sure carb is getting fuel . And always keep a spare ballast resistor in the car , you never know when they will go . mine went on the highway , felt like I ran out of gas .