[SOLD] F.S. Paxton SN60 SuperCharger and most of a Kit 1972 vintage

-
Status
Not open for further replies.

bccuda

Active Member
Joined
Apr 8, 2009
Messages
28
Reaction score
0
Location
Maple Ridge BC Canada
Rating - 100%
1   0   0
Contact seller
Hello, Selling my SN60 supercharger kit for SB dodge. It is incomplete but with a few parts it could easily be put together. I bought this many years ago. It had been run for only a short time on a duster. The mounting bracket was broken and the previous owner did not keep it.
also missing was the tensioner and idler. I think they were left on the engine when the car was parted out.
It is the only one I have seen with a thermoquad carb and enclosure.
I have a cad diagram of the supercharger bracket and mounting spacers. (thanks to dtedler) The original bracket broke as I have been told. I contacted paridise wheels and bought a rebuild kit including the balls form them and the tensioner arm with pulley.
Parts needed to complete is, idler pulley, mounting bracket, spring assembly for tensioner and tubes and filters. The airbox had been modified for side air intake but it would be easy to return to stock.
Included is the SN60 supercharger
Rebuild kit including Balls
Air box and Thermoquad tuned by paxton
Fuel pump with boost reference fitting
Upper and lower pulleys
tensioner arm and pulley
2 used belts (old, I would not use them but good for
setup)
Cad diagrams with great detail to build mounting bracket
from 1/2 aluminum plate.

Only reason for selling after this many years is to fund RB rebuild for my car.
Any questions please feel free to ask. I only check my e-mail once daily

I live in Vancouver Canada, I will ship after payment clears.
I will only sell to Canada or the U.S. (bad experience on fleebay)
I cross to Blaine WA when shipping to the states.
Please allow up to 10 days to ship if crossing the border. shipping insurance and a tracking number will always be supplied.
If you are local and would like purchace that would be no problem (saves shipping as it is fairly heavy)

Ok asking Price is 1200.00 plus Shipping and insurance. serious inquires only please.

thanks
Lawrence

P1100296.jpg


P1100298.jpg


P1100300.jpg


P1100302.jpg


P1100301.jpg


P1100299.jpg


P1100297.jpg


P1100290.jpg


P1100288.jpg
 
Bump, Still available
Also may get the mounting bracked made in the next couple of weeks on a waterjet machine.

bccuda
Lawrence
 
One more bump before I try ebay. Have not got to bracket yet but priced parts needed from Paridise Wheels and they are reasonable.

thanks
bccuda
 
Status
Not open for further replies.
-
Back
Top