Governor valve removal?

74RR · Aug 11, 2012

I'm installing a Manual Valve body in my 904 and it's telling me to remove the governor valves if transmission is out of the car. I have no idea where these are or what they look like. Any pics or can someone tell me where they are?
Thanks.

stingrey · Aug 11, 2012

if i recall right its in the tailshaft

fishy68 · Aug 12, 2012

You have to remove the tailshaft extension housing and they are located in the governor housing that's attached to the tailshaft. It's all held together by a couple snap rings. I doubt it's necessary to remove them for it to work right.

oldkimmer · Aug 12, 2012

.............just block the gov port in the case..........kim.....

70aarcuda · Aug 12, 2012

[ame="http://www.youtube.com/watch?v=-_l_PRZgc1U"]904 Torqueflite Govenor Removal - YouTube[/ame]

you can leave the governor on even with a manual valve body..just will have no effect on shifting..

TrailBeast · Aug 12, 2012

70aarcuda said:
904 Torqueflite Govenor Removal - YouTube

you can leave the governor on even with a manual valve body..just will have no effect on shifting..

X2-3-?

The manual VB bypasses the governor anyway, so it can be left in there.
Won't make a bit of difference.

74RR · Aug 12, 2012

Ok,thanks for the replies>. I'll just leave them in. Thanks!

Governor valve removal?

74RR

Well-Known Member

stingrey

Active Member

fishy68

Tyr Fryr's Inc.

oldkimmer

FABO Gold Member

70aarcuda

Master Hoader of SBM

TrailBeast

AKA Mopars4us on Youtube

74RR

Well-Known Member