Ahh! You have to reduce all paint. Not sure about your product but most urethane single stage is 2:1:.5 meaning 2 parts paint, 1 part hardener, .5 part reducer. You must mix with the reducer so the paint will flow. Then on the last coat mix it 2:1:1. Thats is the issue here.
Give it a few days then you will have to wetsand with 600 to get all of the "Peel" out and the surface smooth again. Then reapply the color. That is unless you want to buy clear. If you get the clear you just need to get the peel out and not break through the color then shoot it.
You have to get 98% of that peel out or it will show later. It won't be as bad but will need a cut and buff for sure after it is resprayed.
Beginners mistake! Don't be bothered by it!!!! Fix it and continue.:cheers:
