LED Dash Light

tcp710 said
Could you post a summary of what bulbs you used? I noticed on superbrightleds.com there are about a million different options for each light type.

Also to clarify, each LED also required a screw in connector for the dash connection? The factory connectors would not work?

Thanks!

Todd

ok so go under "Car bulbs" and then to the "#194/168 Miniature Wedge Base bulbs"...
http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=/specs/WLED-x4.htm

as for the screw in connectors they fit in the stock ones! which is nice... but if you need new ones they are on ebay and i think they were 1/2", they fit a million cars so they are just a standard size, there are 5/8" sockets to though...

Now for the Brake warning light it takes a push and twist bulb. those are called a "BA9" bulb... singe LED is plenty bright...

http://www.superbrightleds.com/cgi-...ction=DispPage&Page2Disp=/specs/ba9s_wide.htm

somethings i did notice...

Using a red bulb for the Brake Warning and Oil Warning lights worked great, nice and bright with great color... but using a red i either 1 or 4 LED did not show thru the high beam lens well, so you can either try a white 4 bulb or just use an old incandescent...

i prefered to have the "X4" for the main speedo (and tach if you have one) and then the single "X" for the temp gauge and such... this gives it a nice splay in brightness. now for both get the widest angle one available...