Ready to install windshields, any suggestions

pauly v.100 said
Don't use the rope-in method, it works for some cars but isn't easy or nessessary on A-bodies.
Get a couple of these install sticks, place the gasket in car first, then place the glass in the lower gasket channel and carefully work the glass into the remainder of the gasket with the sticks. use a little spit if you want to make it a little easier to draw the tools through the gasket/glass.
Use a small bead of windshield sealer on the gasket/pinchweld joint if you must, making sure you only seal the top and sides. leave the bottom alone, if water does get in there it needs a place to get out.
Method is the same for front and back.

http://www.ebay.com/itm/Windshield-..._Automotive_Tools&hash=item5647e9c22c&vxp=mtr

Im am here to tell you that we had no choice at all but the rope in method for the back windshield of my Dart.. this process mentioned here worked great for the front windshield, but unless theres some trick to it, it will not work for the back (I am only referring to the Dart).. we had to place the rear glass in the rubber, and then suck it all into the window channel with a very thin 'rope'.. it was a royal pain.. and in my case, it leaks.. so.. it will be getting pulled out and I will let the 'pros' deal with it..